JK 4-Door Pro Adventure Rack System
Pro Rack Features Include:
- Remove Hard Top Without Removing Rack
- Heavy Duty 2" Tubular Exo-Skeleton Rack System
- One Piece Design Front Hoop
- Front Hoop Weld on Grab Handles
- 4-Door Pro Roof Rails
- CNC Clamps with Threaded Bolt Holes
- Specific Engineered Tube Bend for a Stronger & Sturdier Support Structure
- Two Piece Design Rear Hoop
- 1/4" Steel Frame Mounts
- 7GA Steel Hard Top Rear Adapter Brackets
- Two Piece NVH Hi-Durometer Urethane Bushings
- Allows for Freedom Top Removal
- Industrial Grade Corrosion Resistant Hardware
- Protection for Windshield Assembly
- Protection for the Rear Corners
- Low Profile Design
- Bolts Directly to Factory Locations
- No Drilling or Body Modifications Required
- 850lbs Static Load Capacity
- 375lbs Dynamic Load Capacity
- Accessories Mount Directly to Rack System
- Front Hoop Mount Ready for KMS Kat-Walk
- Works with the Mod Rack Stealth & Mod Rack Expanded Platforms
- Finished in Black Texture Powdercoat
- Quick & Easy Installation
- Made in the USA
The light bar pro front hoop comes with industrial grade corrosion resistant hardware, is finished in our signature black powdercoat to protect it against the elements, and has convenient integrated 1” tube handles for additional safety and provide easier access to the kat-walk accessory and the roof rack.
The pro roof rails are made of strong 2” diameter steel tube and have engineered front bends creating a stronger and sturdier support when out on the trails or on the road. The roof rails have a low profile design that keeps the loaded rack with the lowest center of gravity possible when loaded. Rack supports (375lbs dynamic) and allows for a load capacity of 850lbs (static).
The rails are equipped with CNC steel billet clamps that are secured to the front and rear hoop mounts with corrosion resistant hardware. The rails are finished in a durable black texture powdercoat to protect them against the elements and to keep them looking good.
The rear hoop mount is a two-piece design and is made of strong 2” diameter steel tube and the billet ends are secured with industrial grade corrosion resistant hardware. The rear hoop is black powdercoated to protect the hoop from the elements and uses a noise vibration dampening, two-piece hi durometer urethane bushing to prevent squeaks and rattling when out on the trail.
The rear hoop comes with the Pro Rack Hard Top Rear Adapter Bracket. The adapter bracket is made of 7GA hot rolled steel, raises the rear hoop and spreader bars to clear the factory hard top with no contact, and allows enough room to remove the freedom top without having to remove the rack system.
The rear mounting bracket for the JK rear hoop mount to factory locations at the frame and do not require any drilling or body modifications. The rear frame brackets are CAD formed, laser cut, and made of 1/4” hot rolled steel with an added gusset providing incredible strength and stability for the rack system.
Note: The rear pro hoop kit is designed for a low profile, close fitment to the factory hard top. Factory soft top applications require the rear adapter bracket (R55029) for proper clearance.
Note: The Mod Rack Stealth (R55060) and the Mod Rack Expanded (R55075) Platforms are sold separately.
Note: The front hoop Kat-Walk (R60255) is sold separately.
[click for less...]


VIDEOS
Jeep JK Wrangler Adventure Rack Systems
Black Powdercoat
MetalCloak's Premium Black Textured Powdercoat process is detailed in this updated video.
THE TECH
Hard Top Removal
The 4-Door Pro Rack is a most capable carrying system available for the Jeep Wrangler. The only rack designed so the hard top may be taken off or on without removing.
Simply remove the mounting hardware for the hard top and slide it off; no alterations to the rack system needed.

Front Hoop Light Bar Pro

The front light bar hoop mount is a one-piece design and is made of strong 2” diameter steel tube. The hoop is a solid anchoring point for accessories and provides protection for the window assembly.
Integrated Weld-On Handles
The front hoop light bar pro has welded-on 1" x .120 wall steel tube handles that let you get up and into your Jeep and also provide easy access to the optional kat walk accessory or roof rack.

Factory Mounts

The front hoop bolts directly to the front window assembly via factory attachment points for maximum strength. The hoop requires no drilling or body modification and is secured into place using industrial grade corrosion resistant hardware.
Front Hoop Finishing Caps
The front hoop 2" steel tube is finished with a heavy duty finishing cap to prevent moisture from getting into the tube and causing internal rust.

Mounting Pod Lights

The front hoop allows pod lights to mount directly to the hoop.
Rear Pro Hoop Kit
The rear hoop is made of strong 2" x .120 wall steel tube and mounts directly to the frame and provides superior off-road protection for the rear corners of the JK Wrangler. The rear hoop is black powdercoated to protect the hoop from the elements and does not require any drilling or body modifications.

Shelf-Lock Billet Connectors

Shelf-Lock Billet connections allow for ease of installation and increased functionality.
The rear hoop connects to the rear uprights with solid billet, overlapping Shelf-Locks and secure into place with industrial grade corrosion resistant hardware.
The Billet Shelf Lock connectors are fully welded into the tubes for incredible strength and help facilitate ease of assembly.
Hard Top Adapter Brackets
The rear hoop comes with the Pro Rack Hard Top Rear Adapter Bracket. The adapter bracket is made of 7GA hot rolled steel, raises the rear hoop and spreader bars to clear the factory hard top with no contact.

Noise Vibration Dampening Bushings

The rear hoop uses a noise vibration dampening, two-piece hi durometer urethane bushing to prevent squeaks and rattling when out on the trail.
Frame Mounting Brackets
The rear mounting bracket for the JK rear hoop mount to factory locations at the frame and do not require any drilling or body modifications. The rear frame brackets are CAD formed, laser cut, and made of 1/4” hot rolled steel with an added gusset providing incredible strength and stability for the rack system.

4-Door Pro Roof Rails

The Jeep Wrangler 4-Door JK Pro Roof Rails are used as part of our modular roof system. The roof rails integrate with the front and rear hoops to create a rigid and stable cargo management system. The rails are finished in a durable black texture powdercoat to protect them against the elements and to keep them looking good.
CNC Billet Clamps
The rails are equipped with CNC steel billet clamps that are secured to the front and rear hoop mounts with corrosion resistant hardware and has a clamping force of 800lbs!

Engineered Bend

The pro roof rails are made of strong 2” diameter steel tube and have engineered front bends creating a stronger and sturdier support when out on the trails or on the road.
Low Profile Design
The roof rails have a low profile design that keeps the loaded rack with the lowest center of gravity possible when loaded. Rack supports (375lbs dynamic) and allows for a load capacity of 850lbs (static).

Compatable Platforms
The pro rails allow platforms to be mounted such as the Mod Rack Stealth and the oversize Mod Rack Expanded along with a multitude of accessories to customize your system to fit your specific needs.
The platforms are sold separately.


Optional Front Hoop Kat-Walk

The JK Wrangler Jeep Kat-Walk is a non-slip step platform that provides easy access to the top of the Jeep. The Kat-Walk is a bolt-on accessory that spans the windshield/hood area of JK that attaches to front hoop and is rated for 300lbs.
The Front Hoop Kat-Walk is sold separately.
What's In The Kit?
- Front Hoop Light Bar Pro
- Front Hoop Finishing Caps
- Rear Hoop
- Rear Frame Mount Brackets
- Hard Top Rear Adapter Brackets
- NVH Urethane Bushings
- Pro Rails
- Billet Clamp Ends
- All Required Hardware

TECHNICAL SPECIFICATIONS
Items | Details |
---|---|
Compatibility | 2007 - 2018 4-Door JK Wrangler |
Front Hoop | 2" X .120 Wall Steel Tube |
Integrated Handle | 1" X .120 Wall Steel Tube |
Rear Hoop | 2" X .120 Wall Steel Tube |
Rear Frame Mount Brackets | 1/4" Hot Rolled Steel |
Rear Adapter Brackets | 7GA Hot Rolled Steel |
Bushings | Hi-Durometer Urethane Bushings |
Pro Roof Rails | 2" X .120 Wall Steel Tube |
Clamps | 3" X .50 Wall Mild Carbon Steel |
Steel Coating | Black Powdercoat |
IMPORTANT NOTES
Soft Top: The rear pro hoop kit is designed for a low profile, close fitment to the factory hard top. Factory soft top applications require the rear adapter bracket (R55029) for proper clearance.
Platforms: The Mod Rack Stealth (R55060) and the Mod Rack Expanded (R55075) Platforms are sold separately.
Kat-Walk: The front hoop Kat-Walk (R60255) is sold separately.
INSTALLATION
Installation Difficulty | Easy |
Body Modification | None |
Time to Install | 3 - 4 Hours |
Installation Instructions | Click Here to see a full list of ARS Installation Instructions. |