Bronco 6G Front Bumper System, Non-Winch Edition

Front Non-Winch Bumper for the Bronco by MetalCloak. Rock-Crawling heritage and desert race inspired design with utilitarian functionality. Clearance, Protection, and practical utility with great looks.

Features Include:
  • 3/16" Steel Base
  • 2"OD X .125 Wall DOM Tube
  • Full Length Skid Plate
  • Provisions for Factory Sensors
  • 2 Machined 1x2 Steel D-Ring Recovery Points
  • Frame Mounted Strength
  • All Hardware Required
  • Made in the USA
MetalCloak's Front bumper for the Bronco mixes the strength of our rock-crawling heritage with [click for more...] desert race inspired looks and all the features and function you want from a bumper. The strong 3/16" steel base attaches to the tube end caps and completely wraps around to the sides of the vehicle providing full protection.

Choose the skid plate for you needs; a light weight aluminum version or strong steel skid plate. Skid protection runs from the bumper down to the axles center section that ensures you slide up and over the hazards while out on the trail.

Massive recovery points made of machined 1x2 machined steel are at the ready when the time comes. The D-Ring Recovery Points have a rounded edge design that allows for either the use of a standard metal D-Ring or Soft Shackle.

Every aspect of this bumper has been thought out; sensor holes to retain factory safety features, angled end caps for clearance and some of the best approach angles you are going to find.

If you are Looking for a fantastic addition to upgrade your bumper for your Bronco; get the protection, clearance and additional practical features from a MetalCloak Front Bumper that is made right here in the USA.

Note: The MetalCloak Bronco Front Bumper does not fit the Bronco Raptor.

[click for less...]


Price As Configured:

VIDEOS

MetalCloak's Bronco 6G Bumpers

Who Is MetalCloak?

MetalCloak creates Game-Changing Products for the Off Road Enthusiast.

Premium Black Powder Coat

Our signature Black Textured Powder coat provides a micro-texture semi-gloss finish that is easily repairable after trail damage. Watch the video to learn more.

Proudly Made in the USA

MetalCloak proudly manufactures products in America. Take a glimpse of our incredible team that lives and breaths innovation and quality.

THE TECH

Bronco 6G Front Bumper System

A blue Ford Bronco parked on grass with large off-road tires and Front Bumper System.

Front Winch Bumper for the Bronco by MetalCloak. Rock-Crawling heritage and desert race inspired design with utilitarian functionality. Clearance, Protection Lo-profile winch mount, practical utility with great looks.

End Caps

The strong 3/16" steel base attaches to the tube end caps and completely wraps around to the sides of the vehicle providing full protection.

Close-up of a blue off-road vehicle's front bumper end caps

Skid Plate

Front angle view of a blue Ford Bronco with an aftermarket bumper and skid plate.

A full length skid plate runs from the bumper to your center section to ensure you slide up and over the hazards on the trail. MetalCloak allows you to choose between a steel skid plate that comes in our signature textured black powder coat or shed some weight with the aluminum skid plate option which comes in a raw finish.

D-Ring Recovery Points

Massive recovery points made of machined 1x2 machined steel are at the ready when the time comes.

The D-Ring Recovery Points have a rounded edge design that allows for either the use of a standard metal D-Ring or Soft Shackle.

Close-up of a black D-ring shackle mounted through an aftermarket bumper

Factory Sensors

close up of a plastic circular bracket that retains the Bronco factory sensors

Fits the factory sensors into your bumper with a factory OEM look and function.

  • Works on 3/16" Bumpers
  • Fits 1" Diameter Hole
  • Made of UV Resistant ABS
  • Snaps Into Place

What's in the Kit?

  • Front Bumper Base
  • End Caps
  • Steel or Aluminum Skid Plate
  • Recovery Points
  • Factory Sensor Clips
  • All Required Hardware
A close-up view of a kit's contents, showcasing various tools and items neatly organized for easy access and use.

TECHNICAL SPECIFICATIONS



Items Details
Compatibility 2021 + Bronco 6G
Front Bumper Base 3/16" Hot Rolled Steel
End Caps 3/16" Hot Rolled Steel
2.0" OD X .125 Wall DOM Steel Tube
Skid Plate 3/16" Hot Rolled Steel
3/16" 5052-H32 Aluminum Plate
Coating Black Powder Coat
Aluminum Skid Plate - Raw Metal


IMPORTANT NOTES



Note: The MetalCloak Bronco Front Bumper does not fit the Bronco Raptor.

INSTALLATION



Installation Difficulty Moderate
Body Modification None
Time to Install 4 - 5 Hours
Installation Instructions Click Here to see a full list of MetalCloak Installation Instructions.


Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account